PRODUCT OVERVIEW
When the relative humidity in the power distribution box exceeds 65%, EFR012 will control the heater heating, in order to reduce the moisture condensation and effectively prevent corrosion. Compared with mechanical thermostat, EFR012 with low hysteresis, making it’s switching point and setting accuracy more precise.
TECHNICAL DATA
| Switch difference | 5% RH (+3%RH tolerance) at 25℃ |
| Sensor element | PTC |
| Contact type | change-over |
| Contact resistance | <10mΩ |
| Service life | >100,000 cycles |
| Max.Switching capacity | 8 (1,6) A (AC) 100 W (DC) |
| EMC | acc.to EN 55014-1-2,EN 61000-3-2,EN 1000-3-3 |
| Connection | 5-pole terminal,clamping torque 0.5Nm max.:rigid wire 2.5mm² stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail,EN60715 or for exit filter EF 118 Series |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 64.5x42x38mm |
| Weight | Approx. 80g |
| Installation position | variable |
| Operating/Storage temperature | -0 to+60℃(32 to +140°F)/-45 to+80℃(-49to +176℉) |
| Protection type | IP20 |
| Art.No. | Operating voltage | Setting range humidity |
| 01245.0-00 | 230VAC，50/60Hz | 40 to 90% RH VDE + UL intended |
| 01246.0-00 | 230VAC，50/60Hz | 65% RH pre-set VDE + UL intended |
| 01245.9-00 | 120VAC，50/60Hz | 40 to 90% RH UL intended |
| 01246.9-00 | 1200VAC，50/60Hz | 65% RH pre-set UL intended |
