SP-6000 Commerical Air Conditioning Control Room Thermostat

PRODUCT OVERVIEW

The RTC70.xx is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat. the thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

APPLICATION

For the control of warm-water(floor)heating systems and direct electric heating systems used in Commercial buildings,Residential buildings, Light in dustrial buildings…

AFEATURES

LED in dicator is light when heating is onwith manual switch and knob for easy operation On/off control output for heating device

TECHNICAL DATA

● Voltage: AC230V
● Output relay: 16A
● Power consumption: 5W
● Setting range: 4℃～45℃
● Switching differential:±0.5K
● Ambient temperature: -5℃～50℃
● Protective housing: IP20
● Housing material: self-exting uishing PC
● Floor sensor: rubber-thermoplastic NTC sensor
● Cable length is 3m